/**
 * @file nbus_defines.h
 *
 *  @date: Nov 26, 2025
 *  @author: Juraj Dudak, Matus Necas
 */

#ifndef INC_NBUS_DEFINES_H_
#define INC_NBUS_DEFINES_H_


#if defined(STM32F401xC) || defined(STM32F401xE)
#include "stm32f4xx_hal.h"
#endif

#if defined (STM32L432xx)
#include "stm32l4xx_hal.h"
#endif

#if defined (STM32L031xx) || defined (STM32L082xx)
#include "stm32l0xx_hal.h"
#endif


/* BEGIN GENERAL NBUS DEFINES */

/** @brief Macro for broadcast address (MA = 0). */
#define NBUS_BROADCAST_ADDRESS			0x00
/** @brief Macro for NBus Bridge address (MA = 0, SA = BRIDGE). */
#define NBUS_BRIDGE_ADDRESS				0xFF

/** @brief Macro for RX meta size in bytes. */
#define NBUS_RX_META_SIZE				4
/** @brief Macro for module address in RX packet. */
#define NBUS_RX_MODULE_ADDRESS(packet)	(packet)[0]
/** @brief Macro for sensor address in RX packet. */
#define NBUS_RX_SENSOR_ADDRESS(packet)	(packet)[1]
/** @brief Macro for function code in RX packet. */
#define NBUS_RX_FUNCTION_CODE(packet)	(packet)[2]
/** @brief Macro for #0 data byte in RX packet. */
#define NBUS_RX_DATA0(packet)		    (packet)[3]
/** @brief Macro for CRC8 byte in RX packet. */
#define NBUS_RX_CRC8(packet, size)	    (packet)[(size) - 1]

/** @brief Macro for TX meta size in bytes. */
#define NBUS_TX_META_SIZE				5
/** @brief Macro for #0 data byte in TX packet. */
#define NBUS_TX_DATA0(packet) 		    (packet)[4]

/** @brief Macro for set command flag. */
#define NBUS_SET_CMD(cmd)				((cmd) | 0x20)
/** @brief Macro to set error response. */
#define NBUS_SET_ERR_RESPONSE(fc)		((fc) | 0x80)

#define NBUS_CHECK_ERR_RESPONSE(packet)	((packet)[2] & 0x80)

/* END GENERAL NBUS DEFINES */


/** @brief Enumerate for function codes  */
typedef enum {
	FC_FIND = 0,
	FC_ECHO,			/* 1 */
	FC_STOP,			/* 2 */
	FC_START,			/* 3 */
	FC_PARAM,			/* 4 */
	FC_SENSOR_CNT,		/* 5 */
	FC_SLEEP,			/* 6 */
	FC_WAKEUP,			/* 7 */
	FC_CALIBRATE,		/* 8 */
	FC_RESET,			/* 9 */
	FC_STORE,			/* 0xA => 10 */
	FC_DATA,			/* 0xB => 11 */
	FC_SYNC,			/* 0xC => 12 */
	FC_SENSOR_TYPE,		/* 0xD => 13 */
	FC_INFO,			/* 0xE => 14 */
	FC_SENSOR_FORMAT, 	/* 0xF => 15 */
	FC_SLAVES,		 	/* 0x10 => 16 */
} Nbus_FC_e;


/** @brief Enumerate for Bridge run state. */
typedef enum {
	STATE_STOPPED,
	STATE_TO_STOP,
	STATE_RUNNING,
} Nbus_RunState_e;


/** @brief Structure for PDU data. */
typedef struct {
	uint8_t ma;
	uint8_t sa;
	Nbus_FC_e fc;
} Nbus_PDU_t;


/** @brief Structure for sensor count. */
typedef struct
{
    uint8_t read_only_count;
    uint8_t read_write_count;
} Nbus_SensorCnt_t;


/** @brief Enumerate for error codes.  */
typedef enum {
	OK_CODE                	=	0x00,
	ILLEGAL_FUNCTION       	=	0x01,
	ILLEGAL_DEVICE_ADDRESS 	=	0x02,
	ILLEGAL_DATA_VALUE     	=	0x03,
	SLAVE_DEVICE_FAILURE   	=	0x04,
	ACKNOWLEDGE            	=	0x05,
	DEVICE_BUSY            	=	0x06,
	DEVICE_NOT_READY       	=	0x07,
	PARAM_NOT_IMPLEMENTED  	=	0x10,
	ILLEGAL_FUNCTION_PARAM 	=	0x11,
	DEVICE_IS_READ_ONLY    	=	0x12,
	GENERIC_SUBSLAVE_ERROR 	=	0x13,
	ERR_SUBSLAVE_INIT_FAIL 	=	0x14,
	SUBSLAVE_CUSTOM_ERR_1  	=	0x1A,
	SUBSLAVE_CUSTOM_ERR_2  	=	0x1B,
	SUBSLAVE_CUSTOM_ERR_3  	=	0x1C,
	SUBSLAVE_CUSTOM_ERR_4  	=	0x1D,
	SUBSLAVE_CUSTOM_ERR_5  	=	0x1E,
	SUBSLAVE_CUSTOM_ERR_6  	=	0x1F,
	ERR_OUTPUT_ONLY        	=	0x21,
	ERR_INPUT_ONLY         	=	0x22
} Nbus_EC_e;


/** @brief Enumerate for status codes.  */
typedef enum {
    STATUS_NOT_SUPPORTED 	= 0xFF,
    STATUS_SUCCESS 		 	= 0x00,
    STATUS_FAIL 		 	= 0x01
} Nbus_SC_e;


#endif /* INC_NBUS_DEFINES_H_ */